Output
Signal:4~20mA、1~5V、0~10mA、0~20mA、0~5V
Measuring
Range:0~1kPa...3.5MPa
Power supply: 2-wire 15~28VDC 3-wire 15~28VDC
Electric connection:
plug connection or Φ7.2mm 7-pin cable
Insulation resistor:
100MΩ,50VDC
Construction
Material
Diaphragm: stainless steel 316L
Filled liquid: silicon oil
Shock effect: ≤1% at 3gRMS, 30~2000Hz
Media: liquid or
gas which is compatible with construction material
PMR610
|
Pressure range
|
-0.1MPa…0~20kPa…3.5MPa
|
|
Overpressure
|
1.5 times FS or 110MPa (min.value is valid)
|
|
Power supply
|
1.5mADC
|
|
Signal
|
≥70mVDC(0~20kPa,≥50mVDC)
|
|
Accuracy
|
±0.1%FS(min.) ±0.25%FS(typ.) ±0.5%FS(max.)
|
|
Long-term stability
|
±0.3%FS/year
|
|
Compensation temp.
|
0℃~50℃
|
|
Operation temp.
|
-10℃~80℃
|
|
Storage temp.
|
-40℃~100℃
|
|
Zero temp. coefficient
|
±0.02%FS/℃(typ.) ±0.04%FS/℃(max.)
|
|
FS temp. coefficient
|
±0.02%FS/℃(typ.) ±0.04%FS/℃(max.)
|
|
Housing
|
Stainless steel 1Cr18Ni9Ti
|
|
Diaphragm
|
Stainless steel 316L
|
|
O-ring
|
Viton
|
|
Cable
|
Polythene
|
|
Response time(10%~90%)
|
≤1ms
|
|
Insulation resistance
|
100MΩ,100VDC
|
|
Production
|
IP65(cable connection)
|
1. We suggest to install
tri-valve between the measured point and transmitter to protect the media adding
on transmitter’s positive and negative cavities slowly;
3. Please pay attention that the static pressure should
be less than 20Mpa, transmitter positive and negative cavity should be in the
rating pressure range;
5. Digital indicator
information, please refer to MPR300 datasheet;